The TEC 7100 is one of a series of
new generation pneumatic hotmelt applicators. Probably one of the
world’s highest-output hand-held hotmelt applicators, the
TEC 7100 is a serious alternative to
bulk tank hotmelt systems at a fraction of the cost.
Built to a very high standard, the TEC 7100
is totally self contained. The most unique feature on this tool is the
built-in speed loader, which holds an extra two 43mm glue cartridges in
reserve, and enables the machine to be re-loaded in seconds.
Due to the advanced heater housing design and the powerful dual 500 watt
heaters, the TEC 7100 is able to
dispense up to 5 kilos of molten hotmelt per hour.
Operating temperature is obtained in only 5
minutes from cold via one of the 500 watt cartridge heaters, then when
the trigger is pulled for use, the second 500 watt heater comes into
operation and enables the molten adhesive to be dispensed at a constant
temperature.
Melt Rate: up to 5 kg/hr
depending on adhesive and temperature
The standard tool comes
fitted with a 3 metre cordset. If an extended cordset is required,
then a specially adapted gun can be purchased with no cordset, plus a 6M
or 12M extension cordset that is purchased as an extra.
