Skip to main content
Markets & Applications
Products
Advanced solutions
About
Contact
Contact
Work with us

Glue Size: 12mm

Tecbond LM46

Written by Roger Walker-Arnott on . No Comments on Tecbond LM46

Tecbond LM46 is an economical packaging adhesive, formulated to run at temperatures as low as 130°C. Featuring a faster setting speed than other Tecbond low melt adhesives, Tecbond LM46 provides good adhesion to many of the most common packaging substrates, including paper, card, foam, and some plastics.

Tecbond LM46s properties can be adjusted by varying the application temperature. When applied at 160°C, the adhesive has a lower viscosity and longer open time. When applied closer to 130°C, the viscosity increases to provide better gap filling with a reduced open time.

Tecbond 342

Written by Roger Walker-Arnott on . No Comments on Tecbond 342

Tecbond 342 is a white packaging and construction adhesive formulated to bond triwall and other stiff boards that have proven difficult to bond. Tecbond 342 has extremely high tack, suitable for boards with high spring back/memory. Coupled with the very short open time, strong bonds can be achieved after only a couple of seconds.

Along with its packaging applications, Tecbond 342’s instant grab and white colour make it ideal for cable attachment in the telephone, computer and alarm industry.

Tecbond 14

Written by Roger Walker-Arnott on . No Comments on Tecbond 14

Tecbond 14 is a very fast-setting packaging adhesive designed for use on most paper and board substrates. It is ideal for carton closing and tray forming, and suitable for specialty packaging, point of sale, and wrap-around cartons.

The adhesive is formulated to maximise delivery rate, and sets very fast when compressed. These two features mean packages can be secured in a fraction of the time when compared to taping or stapling. There’s also no need to hold the materials in place as the bond is almost instantaneous.

Tecbond 23

Written by Roger Walker-Arnott on . No Comments on Tecbond 23

Tecbond 23 is an EVA-based multi-purpose product assembly adhesive designed for use on fabrics, ceramics, wood, and many plastics such as PVC, polycarbonate, and acrylics (not PP or PE). This makes it a good all-around adhesive for product assembly and construction applications.

The adhesives extended open and working time provide security in the production process, allowing adjustments to be made shortly after initial compression before the final bond is made.

Tecbond 210

Written by Roger Walker-Arnott on . No Comments on Tecbond 210

Tecbond 210 is a clear, fast setting hot melt adhesive designed to create temporary bonds that are easily removable. Formulated for use on paper, card, and coated surfaces, Tecbond 210 is predominantly used for attaching credit cards, labels, and promotional material to mailing letters, magazine pages or backing cards.

Tecbond 210 has excellent high and low temperature resistance, with bonds being able to withstand temperatures as high as 120°C and as low as -70°C without creeping.

Tecbond 213

Written by Roger Walker-Arnott on . No Comments on Tecbond 213

Tecbond 213 is a general-purpose hot melt adhesive designed to bond substrates commonly used in product assembly applications and the flooring industry.

Excellent bonds can be achieved on ceramics, rigid PVC, wood, fabric, and many plastics. Outside of product assembly, Tecbond 213 is also used in the flooring and woodworking industries thanks to its strong bonding capabilities.

Featuring a high tack and ample open time, Tecbond 213 is one of the most efficient and cost-effective general-purpose hot melt adhesives on the market today.

Tecbond 214

Written by Roger Walker-Arnott on . No Comments on Tecbond 214

Tecbond 214 is an economical packaging adhesive designed for use on most paper and board substrates. Tecbond 214 is one of the best-selling packaging adhesives due to its strong bonding capabilities, high molten tack, and fast setting speeds.

Formulated using 40% bio-based materials, Tecbond 214’s short open time speeds up carton closing procedures, with no need for extended holding or clamping periods after compression. Coupled with the adhesives cost per closure, Tecbond 214 is the ideal replacement for staples or tape for cardboard bonding applications.

Tecbond 232

Written by Roger Walker-Arnott on . No Comments on Tecbond 232

Tecbond 232 is a clear general-purpose hot melt adhesive designed to provide excellent adhesion to fabrics. Predominantly used for product assembly and recreational applications, Tecbond 232 will also achieve strong bonds on untreated wood, paper, and many board substrates.

Tecbond 232 has exceptional gap-filling properties thanks to its high viscosity, and the finished bonds are resistant to temperatures as low as -30°C.

Tecbond 238

Written by Roger Walker-Arnott on . No Comments on Tecbond 238

Tecbond 238 is a clear construction adhesive for attaching PVC and ABS plastics to a variety of materials, including wood, brick, plasterboard, steel beams, and painted surfaces.

Designed for use by electricians and tradespeople, Tecbond 238 is suitable for mounting trunking, junction boxes, PIRS, smoke detectors, CCTV cameras, and cabling to walls and beams. It provides a faster and less destructive alternative to nails and screws.

Tecbond 239

Written by Roger Walker-Arnott on . No Comments on Tecbond 239

Tecbond 239 is a clear general-purpose hot melt adhesive designed to provide strong bonds on wood, paper and card. Predominantly a crafting adhesive, Tecbond 239 is used in many product assembly applications where a colourless adhesive is needed.

Tecbond 239’s high viscosity makes it an ideal adhesive for gap filling applications. Finished bonds are resistant to temperatures as low as -30°C.

Tecbond 240

Written by Roger Walker-Arnott on . No Comments on Tecbond 240

Tecbond 240 is a versatile and cost-effective all-purpose adhesive designed to provide tough, long-lasting bonds on a wide variety of materials, including wood, paper, card, light-gauge metals, and many plastics.

Used across a variety of industries including recreational, construction, packaging, and product assembly, Tecbond 240 is a clear adhesive that can be pigmented in almost any colour. Not only does this enable it to be used as a decorative material as well as an adhesive, but it also allows customers to match colours to their projects or brands.

Tecbond 242

Written by Roger Walker-Arnott on . No Comments on Tecbond 242

Tecbond 242 is a clear, high-performance product assembly adhesive formulated to provide excellent adhesion to wood, paper, card, light gauge metals, many plastics such as PVC, acrylics, and painted surfaces.

Tecbond 242’s ample open time coupled with its very high viscosity allows plenty of time for substrates to be fixed, without the worry of sagging on vertical surfaces.