Foundrytec – The hot melt adhesive for sand cores and foundry systems

Foundrytec hot melt adhesives have been designed for use with sand cores, lost foam, and lost wax/investment processes for mould and core assembly. Each grade in the foundrytec range has been specially formulated to meet the user’s specific needs while providing fast and accurate results.

Compared to traditional water-based adhesives used in core assembly, foundrytec hot melts have much faster setting speeds, with almost instantaneous bonding after initial compression. This allows cores to be moved, dipped, or dried immediately after construction, increasing productivity and removing the need for storage spaces required for drying.

Along with their fast setting speeds, each foundrytec grade has been formulated to provide additional benefits for specific use cases. Grades such as foundrytec 104 have very long open times, allowing users to accurately position core components before substrate compression, whereas foundrytec 705 and 708 have very high heat resistance, allowing constructed cores to be dried at much higher oven temperatures.

Pouring molten metal into sandcore mold

Foundrytec adhesives also have a much lower ash content and outgassing risk in comparison to both water and solvent-based adhesives. These are particularly important factors in the lost wax/investment casting process, as it reduces the risk of porosity or imperfections in the finished mould. Furthermore, the bulk formulations used in the lost foam process are designed to maximise thermal stability, minimising viscosity buildup inside the holding tanks, and ensures string-free application for longer.

All grades in the foundrytec range are available in 43mm slugs and are compatible with the 3400, 6000 and 7000 series of tec bead applicators. The adhesives and tools are designed to work in tandem with each other to provide the user with the highest possible output with minimal effort. Additionally, foundrytec adhesives are clean to handle, with no organic solvents or harmful chemicals present, and have a near-unlimited shelf life.

3000 series gun on-top of sandcore

If you’d like any additional information or would like to request a sample, do not hesitate to contact our sales team.

sales@poweradhesives.com

tel: +44 (0)1268 885801

Tagged as

Leave a Reply

Your email address will not be published. Required fields are marked *

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

43mm hot melt adhesives: Why should you use them?

For over 40 years, Power Adhesives has been producing hot melt adhesive formulations in 43mm diameter slugs. But why would you need 43mm slugs? What applications are they most beneficial for? And why should you choose to use 43mm adhesives over the traditional 12mm sticks? Output Looking to increase overall adhesive output? Then opt for […]

What to consider when choosing your hot melt adhesive grade

With hot melt adhesive technology constantly advancing and offering new solutions to a range of applications, new users need to understand what they’re looking for in their adhesive. It’s important to understand how different factors in the bonding process will affect the grade of hot melt you need. Below, we will detail some of the […]

Tecbond 23 – The strong, multi-purpose product assembly adhesive

A staple of the tecbond range and one of the more popular shaped hot melt adhesives on the market, tecbond 23 is designed to offer superior bonding on the most commonly used building materials. Tecbond 23 is an EVA-based, multi-purpose hot melt adhesive that provides excellent bonds on a wide variety of materials, including hard […]

Become a distributor for Power Adhesives

Power Adhesives is dedicated to improving the performance and application of hot melt adhesive systems for users around the world.

We’re always on the lookout for motivated, knowledgeable distribution companies that we can build long-lasting partnerships with. If you think your customers could benefit from any of the products in our range, get in touch now to find out more about how we can work together.