Foundrytec 601 is a pale-amber hot melt adhesive designed for bonding sand cores in the foundry industry. Foundrytec 601 is designed to have a very fast setting speed, removing the need for storage spaces dedicated to core drying.
Alongside its rapid setting speeds, Foundrytec 601 has good heat resistance, ideal for cores that require oven drying after completion.
Foundrytec 501 is a pale-amber hot melt adhesive designed for bonding sand cores in the foundry industry. Foundrytec 501 has a lower viscosity that other Foundrytec grades to facilitate very close bonds between cores. This reduces the risk of deformations in the finished product.
The adhesives low viscosity also prevents stringing from the applicator nozzle and improves overall adhesive output.
Foundrytec 301 is a pale-amber hot melt adhesive designed for bonding sand and ceramic cores in the foundry industry. Foundrytec 301 prioritises bond strength between sand cores, with a slightly slower setting speed than other Foundrytec grades.
Foundrytec 301 has extremely low ash content (below 0.02%) reducing the risk of outgassing in the moulds. This formulation is ideal for steel foundries where ceramic runner systems are used.
Foundrytec 104 is an off-white hot melt adhesive designed to bond sand core pieces together in the foundry industry. Formulated to have an extended open time, the adhesive is ideal for larger, more complex core pieces that may not be brought together quickly.
Outside of its longer open time, Foundrytec 104 has good heat resistance designed to withstand higher oven temperatures in the drying process.
Tecbond 342 is a white packaging and construction adhesive formulated to bond triwall and other stiff boards that have proven difficult to bond. Tecbond 342 has extremely high tack, suitable for boards with high spring back/memory. Coupled with the very short open time, strong bonds can be achieved after only a couple of seconds.
Along with its packaging applications, Tecbond 342’s instant grab and white colour make it ideal for cable attachment in the telephone, computer and alarm industry.
Tecbond 345 is a fast-setting, white packaging adhesive, providing versatile adhesion to difficult substrates.
Designed to be used mainly on paper and board, its instant grab capabilities mean it can bond coated surfaces, such as UV varnish, that other adhesives would otherwise struggle with. The adhesive structure is based on the latest metallocene catalysed polyolefin elastomers.
Along with its class-leading bond strength and versatility, Tecbond 345 has been designed to withstand temperatures as low as -40 °C, making it the ideal adhesive for products stored in deep freeze.
Tecbond 410 is a sprayable hot melt adhesive formulated for use with Tec spray applicators.
Predominately used for pallet stabilisation and tile spacing, the adhesive’s application method also makes it ideal for attaching lightweight foams and polystyrene to the insides of protective cases.
Its low tack is designed to provide a sufficient bond, but can be easily removed without causing substrate damage.
The adhesive cools rapidly upon extrusion ensuring it doesn’t melt or burn sensitive substrates, while the increased coverage ensures there is a much stronger bond than possible with traditional bead guns.
Tecbond 420 is a sprayable hot melt adhesive formulated for use with Tec spray applicators.
Tecbond 420 is a general-purpose adhesive, primarily used in the manufacture of mattresses and HVAC units, but can also be used as a carpet adhesive, replacing the need for nails and tacks around stair nosing and skirting boards.
Its three-minute open time allows for the accurate positioning of substrates prior to compression, without the worry of the adhesive losing its tack.
The adhesive cools rapidly upon extrusion ensuring it doesn’t melt or burn sensitive substrates, while the increased coverage ensures there is a much stronger bond than possible with traditional bead guns.
Tecbond 420 is UL 2395 certified for bonding insulation in heating and cooling appliances. The UL Standard 2395 tests the adhesive for hot and cold temperature resistance, moisture resistance, flame spread and smoke development.
Tecbond 425 is a sprayable hot melt adhesive formulated for use with Tec spray applicators.
Designed as a general-purpose adhesive, Tecbond 425 has the highest initial tack of any Tecbond spray grade, ideal for applications that experience high tension upon compression. Suitable for use on wood, many plastics and heat-sensitive materials such as foams and expanded polystyrene, it’s lower viscosity allows for a better physical bond on more porous substrates.
The adhesive cools rapidly upon extrusion ensuring it doesn’t melt or burn sensitive substrates, while the increased coverage ensures there is a much stronger bond than possible with traditional bead guns.
Tecbond 425 is UL 2395 certified for bonding insulation in heating and cooling appliances. The UL Standard 2395 tests the adhesive for hot and cold temperature resistance, moisture resistance, flame spread and smoke development.
Tecbond 430 is a sprayable hot melt adhesive formulated for use with Tec spray applicators.
Tecbond 430 is a high-performance adhesive designed for use on wood, plastics, and many board substrates. Formulated with a longer open time and higher tack, Tecbond 430 is the ideal adhesive for larger product assembly applications.
The adhesive cools rapidly upon extrusion ensuring it doesn’t melt or burn sensitive substrates, while the increased coverage ensures there is a much stronger bond than possible with traditional bead guns.
