Tecbond 110-PR is a light-brown bulk hot melt adhesive designed for high-speed packaging applications. Available in prill format, the adhesive has a short open time to facilitate increased production and faster assembly of cartons.
Tecbond 110-PR works with most bulk hot melt tanks, and can be applied via spray or jet. The adhesives high tack ensures a near-instant hold once substrates are compressed.
Tecbond 1X is a woodworking and packaging adhesive designed to bond cardboard, paper, and wood substrates. Tecbond 1X has been specifically formulated to have a lower viscosity than many other market comparable adhesives, resulting in better surface penetration and tighter final joints.
Alongside tighter joints, Tecbond 1X’s low viscosity provides excellent output when used in conjunction with Tec applicators.
Tecbond 1942 is a packaging and woodworking adhesive designed to bond difficult substrates to wooden surfaces. Some of these substrates include nylon, ABS, rigid PVC, melamine and light-gauge metals.
Tecbond 1942 has been formulated to have a short open time, leading to increased installation speed and providing a strong bond within minutes of compression.
Tecbond 550 is an amber v-groove adhesive for large-scale plasterboard and drywall fabrication. The adhesive is formulated with a higher output and lower viscosity than Tecbond 523, ideal for scenarios where tighter joins are required.
The adhesives low viscosity also allows it to effectively flow in the porous surface of the plasterboard, increasing physical bond strength, while its very high molten tack ensures an almost instant hold without the need for extended holding or clamping periods. The finished bond is so strong, the plasterboard will break before the bond does.
Foundrytec 708 is an amber coloured, polyamide-based hot melt adhesive designed for bonding sand cores in the foundry industry. Foundrytec 708 has class-leading heat-resistance and allows finished cores to be oven dried at much higher temperatures.
When compared to Foundrytec 705, Foundrytec 708 has a lower viscosity for tighter joins between core pieces and a shorter open time leading to faster formation of the overall bond.
Foundrytec 501 is a pale-amber hot melt adhesive designed for bonding sand cores in the foundry industry. Foundrytec 501 has a lower viscosity that other Foundrytec grades to facilitate very close bonds between cores. This reduces the risk of deformations in the finished product.
The adhesives low viscosity also prevents stringing from the applicator nozzle and improves overall adhesive output.
Tecbond ski repair rods are polymer-based filling and repair sticks used for the more permanent repair of scratches, cuts, and voids in the base of polyethylene skis and snowboards.
Used with the Tec range of ski repair applicators, repair rods are melted and compressed into the damaged material, leading to a more robust finish and longer-lasting repair. Use with the RP360 for the strongest possible finish.
Tecbond Ski Repair Candles are polymer-based filling and repair material similar to Ptex. They provide temporary repair for scratches, cuts, and voids in the base of polyethylene skis and snowboards.
Quick and easy to use, needing only a heat source to work, the repair candles are melted at one end and the molten material dripped into the damaged area. The excess can then be trimmed using a scraper or planing tool to create a smooth finish.
Tecbond LM46 is an economical packaging adhesive, formulated to run at temperatures as low as 130°C. Featuring a faster setting speed than other Tecbond low melt adhesives, Tecbond LM46 provides good adhesion to many of the most common packaging substrates, including paper, card, foam, and some plastics.
Tecbond LM46s properties can be adjusted by varying the application temperature. When applied at 160°C, the adhesive has a lower viscosity and longer open time. When applied closer to 130°C, the viscosity increases to provide better gap filling with a reduced open time.
Tecbond 342 is a white packaging and construction adhesive formulated to bond triwall and other stiff boards that have proven difficult to bond. Tecbond 342 has extremely high tack, suitable for boards with high spring back/memory. Coupled with the very short open time, strong bonds can be achieved after only a couple of seconds.
Along with its packaging applications, Tecbond 342’s instant grab and white colour make it ideal for cable attachment in the telephone, computer and alarm industry.
Tecbond 345 is a fast-setting, white packaging adhesive, providing versatile adhesion to difficult substrates.
Designed to be used mainly on paper and board, its instant grab capabilities mean it can bond coated surfaces, such as UV varnish, that other adhesives would otherwise struggle with. The adhesive structure is based on the latest metallocene catalysed polyolefin elastomers.
Along with its class-leading bond strength and versatility, Tecbond 345 has been designed to withstand temperatures as low as -40 °C, making it the ideal adhesive for products stored in deep freeze.
Knottec 7713 is a polyamide hot melt filler specifically formulated for the fast and long-lasting repair of wood defects, including knots, scratches, splits, and large voids.
Available in 17 different colours to match any shade of wood finish, Knottec 7713 provides tough, hard-wearing repairs on indoor hardwood objects such as wooden doors, hardwood flooring, and furniture.
Requiring very little preparation and working time, Knottec 7713 is most commonly used in the hardwood flooring industry as an alternative to wood putties and epoxies.
