Skip to main content
Markets & Applications
Construction & Trade
Large modern looking dining table with ornate chairs around it
Woodworking & Carpentry

Woodworking
Wood repairs

Plasterboard

Plasterboard & drywall

Industrial & Manufacturing
Windmills Turbines And A Blue Sky Generating Electricity Green Energy
Composites

Vacuum Infusion
RTM

Electrical Components

Potting & Encapsulating
Overmoulding

Product Assembly
Packaging & Print
DIY, Home & Recreation
Products
Advanced solutions
About
Contact
Contact
Work with us

Open time: 21-40s

Tecbond 523

Written by Ellis Fowler on .

Tecbond 523 is a pale amber, economical, v-groove adhesive for plasterboard and drywall fabrication. The adhesive provides a good balance of adhesion, working time and output to ensure a solid bond, while decreasing working times when compared to tapes, tacks, and screws.

The adhesives viscosity allows it to effectively flow in the porous surface of the plasterboard, while its molten tack removes the need for extended holding or clamping periods. The finished bond is so strong, the plasterboard will break before the bond does.

Foundrytec 701

Written by Ellis Fowler on .

Foundrytec 701 is a white, hot melt adhesive designed for bonding sand cores in the foundry industry. Foundrytec 701 has excellent heat-resistance, ideal for foundries that oven dry finished cores at temperatures of around 90°C to 100°C.

The adhesives long open time facilitates use with larger core sections that may not be brought together immediately after adhesive application. In some instances, bonds may take up to 24 hours to develop maximum heat resistance and bond strength.

Foundrytec 301

Written by Ellis Fowler on .

Foundrytec 301 is a pale-amber hot melt adhesive designed for bonding sand and ceramic cores in the foundry industry. Foundrytec 301 prioritises bond strength between sand cores, with a slightly slower setting speed than other Foundrytec grades.

Foundrytec 301 has extremely low ash content (below 0.02%) reducing the risk of outgassing in the moulds. This formulation is ideal for steel foundries where ceramic runner systems are used.

Tecbond 410

Written by Power Adhesives on .

Tecbond 410 is a sprayable hot melt adhesive formulated for use with Tec spray applicators.

Predominately used for pallet stabilisation and tile spacing, the adhesive’s application method also makes it ideal for attaching lightweight foams and polystyrene to the insides of protective cases.

Its low tack is designed to provide a sufficient bond, but can be easily removed without causing substrate damage.

The adhesive cools rapidly upon extrusion ensuring it doesn’t melt or burn sensitive substrates, while the increased coverage ensures there is a much stronger bond than possible with traditional bead guns.

Tecbond 7784

Written by Power Adhesives on .

Tecbond 7784 is an amber product assembly adhesive designed for use on metal, wood, glass, ceramics, and many plastics. Tecbond 7784 has been specially formulated to provide both high and low-temperature resistance, with strong and flexible bonds at temperatures as high as 120°C and as low as -60°C. This makes it especially useful for many product-assembly and electrical applications involving working machinery.

As with many other polyamide adhesives, Tecbond 7784 is resistant to most oils, fuels, and grease as well as mild chemicals. It is commonly used in car engines and oil filters to not only hold components in place but also prevent some components from coming into contact with each other (such as oil filter fins).

Tecbond 261

Written by Power Adhesives on .

Tecbond 261 is a versatile and strong product assembly adhesive with the ability to bond a variety of substrates, including wood, metal, glass, ceramics, and many plastics, including polypropylene. The adhesive’s high bond strength and flexibility also make it ideal for many general-purpose applications.

Along with its high bond strength, Tecbond 261 features a long open time, allowing for the accurate positioning of substrates before compression, at which point the adhesive sets quickly with enough bond flexibility to withstand small substrate movements.

Tecbond 265

Written by Power Adhesives on .

Tecbond 265 is a high-performance packaging and product assembly adhesive designed to bond UV-varnished board and card.

Tecbond 265 is one of the only adhesives in the Tecbond range capable of bonding a wide variety of plastics, including polyethylene, polypropylene, polycarbonate, nylon, and rigid PVC.

Alongside its ability to bond difficult plastics, Tecbond 265 forms excellent bonds on cardboard, light gauge metals, and polystyrene. The adhesive’s long open time aids in product assembly applications where the two substrates may not be compressed immediately.

Tecbond 23

Written by Power Adhesives on .

Tecbond 23 is an EVA-based multi-purpose product assembly adhesive designed for use on fabrics, ceramics, wood, and many plastics such as PVC, polycarbonate, and acrylics (not PP or PE). This makes it a good all-around adhesive for product assembly and construction applications.

The adhesives extended open and working time provide security in the production process, allowing adjustments to be made shortly after initial compression before the final bond is made.

Tecbond 213

Written by Power Adhesives on .

Tecbond 213 is a general-purpose hot melt adhesive designed to bond substrates commonly used in product assembly applications and the flooring industry.

Excellent bonds can be achieved on ceramics, rigid PVC, wood, fabric, and many plastics. Outside of product assembly, Tecbond 213 is also used in the flooring and woodworking industries thanks to its strong bonding capabilities.

Featuring a high tack and ample open time, Tecbond 213 is one of the most efficient and cost-effective general-purpose hot melt adhesives on the market today.

Tecbond 232

Written by Power Adhesives on .

Tecbond 232 is a clear general-purpose hot melt adhesive designed to provide excellent adhesion to fabrics. Predominantly used for product assembly and recreational applications, Tecbond 232 will also achieve strong bonds on untreated wood, paper, and many board substrates.

Tecbond 232 has exceptional gap-filling properties thanks to its high viscosity, and the finished bonds are resistant to temperatures as low as -30°C.

Tecbond 239

Written by Power Adhesives on .

Tecbond 239 is a clear general-purpose hot melt adhesive designed to provide strong bonds on wood, paper and card. Predominantly a crafting adhesive, Tecbond 239 is used in many product assembly applications where a colourless adhesive is needed.

Tecbond 239’s high viscosity makes it an ideal adhesive for gap filling applications. Finished bonds are resistant to temperatures as low as -30°C.

Tecbond 240

Written by Power Adhesives on .

Tecbond 240 is a versatile and cost-effective all-purpose adhesive designed to provide tough, long-lasting bonds on a wide variety of materials, including wood, paper, card, light-gauge metals, and many plastics.

Used across a variety of industries including recreational, construction, packaging, and product assembly, Tecbond 240 is a clear adhesive that can be pigmented in almost any colour. Not only does this enable it to be used as a decorative material as well as an adhesive, but it also allows customers to match colours to their projects or brands.