Vactac®

The solvent-free technology for vacuum infused composites

The vactac® adhesive system is the direct replacement for solvent-based adhesives, offering users a more sustainable and environmentally friendly alternative. Free from VOCs, hazardous chemicals and propellants, vactac is safer for both the user and the environment.

Learn more
How much can you save?

Vactac®

Solvent-free technology for vacuum infused composites

The vactac® adhesive system is the direct replacement for solvent-based adhesives, offering users a more sustainable and environmentally friendly alternative. Free from VOCs, hazardous chemicals and propellants, vactac is safer for both the user and the environment.

Learn more
How much can you save?

VOC-Free

Hot melts are free from organic solvents and hazardous substances, making them safe to handle and use

100% solids

Vactac allows you to use 100% of what you buy with no waste product

No airborne particles

Keep workers safe and workshops clean as there are no atomized particles

High instant tack

Forms an almost instant bond when compressed with no long drying or setting periods

Sustainable, cost-effective and safe-to-use positioning adhesive

Sustainable, cost-effective and safe-to-use positioning adhesive

As well as being a more environmentally friendly alternative to solvent-based adhesives, the application system ensures there’s no hazardous waste product, removing specialised disposal costs. Additionally, vactac® adhesives provide a higher instant tack than most other positioning adhesives, with ample open times allowing accurate fibre positioning without the risk of the adhesive drying before the bond is made.

Spray applicators
Adhesives

tec 6300
industrial spray adhesive gun

Removable base

Detachable base allowing use in tight environments

Choice of nozzles

A selection of interchangeable nozzles to adjust the amount of adhesive and angle of application

Easy loading

The pneumatically assisted mechanism makes loading and dispensing easier

Pneumatic assisted delivery

Compressed air increases output whilst removing effort on the trigger

Extremely robust 43mm (1¾″) spray glue gun with power-on light. Designed for industrial use, it sprays hotmelt at any angle with adjustable spray pattern. A non-toxic adhesive spray system, it covers large areas and applies hot melt to heat-sensitive substrates without damage. 7 bar (100psi) 85L/min (3 cfm) air supply required.

Get in touch

Removable base

Detachable base allowing use in tight environments

Choice of nozzles

A selection of interchangeable nozzles to adjust the amount of adhesive dispensed

Easy loading

The pneumatically assisted mechanism makes loading and dispensing easier

Pneumatic assisted delivery

Compressed air increases output whilst removing effort on the trigger

Tec 6300 Specifications
Type
Pneumatic spray gun
Glue size
43mm (1¾”) glue stick
Melt rate
4.2kg (10lb) / hr
Voltage
120V & 230V
Wattage
500W
AC Hz
AC 50-60Hz
Heater
Cartridge
Temp Control
Interchangeable thermostat
Temperature (hotmelt)
180° (350°F)
Weight
1.4kg (3lb)
Power cable
6m or 12m detachable flexible cable with plug
Plug variants
UK, Euro, USA, ZA, AU
Pneumatic requirements
7 bar (100psi) 85 l/m (3cfm)
Packaging
Cardboard box – 370 x 310 x 100mm (2.5kg / 5.5lb) 5 per outer carton – 340 x 380 x 540mm (13.5kg / 30lb)

Specifications

PTC – Positive Temperature Coefficient

CTN – Carton

Ah – Ampere hours

PET – Polyethylene terephthalate

Specifications

Type
Pneumatic spray gun
Glue size
43mm (1¾”) glue stick
Melt rate
4.2kg (10lb) / hr
Voltage
120V & 230V
Wattage
500W
AC Hz
AC 50-60Hz
Heater
Cartridge
Temp Control
Interchangeable thermostat
Temperature (hotmelt)
180° (350°F)
Weight
1.4kg (3lb)
Power cable
6m and 12m detachable flexible cable with plug
Plug variants
UK, Euro, USA, ZA, AU
Pneumatic requirements
7 bar (100psi) 85 l/m (3cfm)
Packaging
Cardboard box – 370 x 310 x 100mm (2.5kg / 5.5lb) 5 per outer carton – 340 x 380 x 540mm (13.5kg / 30lb)

tec 7300
industrial spray gun

Removable base

Detachable base allowing use in tight environments

Choice of nozzles

A selection of interchangeable nozzles to adjust the amount of adhesive and angle of application

Speedy loading

Speedloader allows up to three slugs to be loaded so you can work for longer with no downtime

Pneumatic assisted delivery

Compressed air increases output whilst removing effort on the trigger

Extremely robust, 43mm (1¾″) spray glue gun. Non-toxic adhesive spray system, sprays hotmelt at any angle, adjustable spray pattern to cover large areas. Apply hot melt to heat-sensitive substrates without damage. Speedloader to reduce downtime, plus power-on light. 7 bar (120psi) 85L/min (3 cfm) air supply required.

Get in touch

Removable base

Detachable base allowing use in tight environments

Choice of nozzles

A selection of interchangeable nozzles to adjust the amount of adhesive dispensed

Speedy loading

Speedloader allows up to three slugs to be loaded so you can work for longer with no downtime

Pneumatic assisted delivery

Compressed air increases output whilst removing effort on the trigger

Specifications

PTC – Positive Temperature Coefficient

CTN – Carton

Ah – Ampere hours

PET – Polyethylene terephthalate

Specifications

Type
Pneumatic spray gun
Glue size
43mm (1¾”) glue stick
Melt rate
5.25kg (11½lb) / hr
Voltage
120V & 230V
Wattage
1000W
AC Hz
AC 50-60Hz
Heater
Cartridge
Temp Control
Interchangeable thermostat
Temperature (hotmelt)
180° (350°F)
Weight
2.3kg (5lb)
Power cable
6m and 12m detachable flexible cable with plug
Plug variants
UK, Euro, USA, ZA, AU
Pneumatic requirements
7 bar (100psi) 85 l/m (3cfm)
Packaging
Cardboard box – 430 x 380 x 110mm (2.9kg / 6.4lb) 5 per outer carton – 400 x 450 x 570mm (15.5kg / 34lb)
Tec 7300 Specifications

Specifications

PTC – Positive Temperature Coefficient

CTN – Carton

Ah – Ampere hours

PET – Polyethylene terephthalate

Type
Pneumatic spray gun
Glue size
43mm (1¾”) glue stick
Melt rate
5.25kg (11½lb) / hr
Voltage
120V & 230V
Wattage
1000W
AC Hz
AC 50-60Hz
Heater
Cartridge
Temp Control
Interchangeable thermostat
Temperature (hotmelt)
180° (350°F)
Weight
2.3kg (5lb)
Power cable
6m and 12m detachable flexible cable with plug
Plug variants
UK, Euro, USA, ZA, AU
Pneumatic requirements
7 bar (100psi) 85 l/m (3cfm)
Packaging
Cardboard box – 430 x 380 x 110mm (2.9kg / 6.4lb) 5 per outer carton – 400 x 450 x 570mm (15.5kg / 34lb)

Which vactac® adhesive?

Vactac® adhesives have been specially formulated for use with vacuum infused composites. With their aggressive tack and long open time, they offer more safety and flexibility for the user

Vactac 100

Open time : Up to 5 mins

Off-white adhesive, nearly invisible once applied. Its very aggressive tack ensures an almost instant bond upon compression

TDS SDS

Vactac 200

Open time : Up to 5 mins

Dark-amber adhesive for easy visibility when applying. Its very aggressive tack ensures an almost instant bond upon compression. Higher output than vactac 100

TDS SDS

Vactac 330

Open time : Up to 7 mins

Dark red adhesive for use with the coat-weight camera. Easily visible during application with longer open time for larger applications

TDS SDS

Vactac® savings calculator

Calculate how much you can save by switching to vactac® adhesives. The savings value is generated using the average coat weight used for the lay-up process, along with the waste product in your current adhesive.

As vactac® adhesives are 100% solids with no waste, you get more for the price! 

Interested in vactac®? Get in touch.